BLUE BOAR 2" (51mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica Reviews
More Picture
BLUE BOAR 2" (51mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica Feature
- TCT Hole cutters cut holes up to 10x faster and lasts up to15x longer than bi-metal hole saws
- Carbide tipped teeth quickly cut holes in materials that standard bi-metal hole saws will not cut
- 2-1/4" cutting depth and wide range of sizes from 5/8" to 6-1/4" diameter
- Aggressive tooth rake and deep side gullets for both fast cutting and fast plug removal
- ** Arbor and pilot bit NOT INCLUDED- works with all standard 2 pin 5/8"-18 thread arbors
*** Hole Cutter may be damaged by nail strikes *** Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, and fiber reinforced composites. ****
These TCT hole cutters will outperform and outlast dozens of ordinary self-feed bits (and without the mess) or bi-metal hole saws (without the time lost prying out the cut plugs). Use a single hole cutter for every material on the job site.
Aggressive cutting tips and the ability to cut almost every building and construction material makes short work of any project. The rake of the TCT teeth and the drop shaped chip clearance slots allow for easy removal of plugs making for an uninterrupted drilling process
The 2-1/4" cutting depth enables its use for cutting through strapping and joists without ship auger drill bits. Quickly mounts to any standard 3/8" arbor or the Hole Pro XL Arbor for use with Hole Pro dust shields to trap the dust and shavings and control the cutting depth.
***
The design of these TCT hole cutters enables drills rated for 3" maximum hole sizes in wood when using a bi-metal hole saw, can easily cut holes up to 6-1/4" diameter in the same materials using the Blue Boar TCT hole cutter.
***
Use with any 2-pin style hole saw arbor with 5/8"-18 thread
Go tO Store Now !!
Jan 07, 2011 18:19:04
0 comments:
Post a Comment