Blue Boar TUH-14 - 14 Piece Universal Tungsten Carbide Deep Hole Saw Kit - Cut 10x Faster, 3x Larger, and 40x more holes per battery charge versus bi-metal hole saws in wood, chipboard, MDF, cement board, etc. Deep side slots for fast plug removal Reviews
Other Picture
Blue Boar TUH-14 - 14 Piece Universal Tungsten Carbide Deep Hole Saw Kit - Cut 10x Faster, 3x Larger, and 40x more holes per battery charge versus bi-metal hole saws in wood, chipboard, MDF, cement board, etc. Deep side slots for fast plug removal Feature
- 8 Tungsten Carbide hole cutters, sizes: - 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2"
- 1 5/8"-18 arbor with 7/16" shank, hex wrench
- 4 pilot bits (1-HSS, 1-masonry, 1-flat wood, and 1-spade porcelain bits)
- 2-3/8" ultra deep cutting depth
- All in a sturdy storage case that holds sizes up to 4-5/8" diameter
*** Hole Cutter may be damaged by nail strikes *** The Blue Boar TUH14 - 14 Piece Universal Multipurpose TCT tungsten carbide hole cutter Kit includes 8 tungsten carbide hole saws, sizes: 1",1-1/8",1-3/8",1-1/2",1-3/4", 2", 2-1/4", 2-1/2" diameter and have a 2-1/4" cutting depth. Perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, wall tile, vertically perforated brick, clay roofing tiles, concrete cinder block, Hardie fiber cement board, plywood, chipboard, fiber reinforced composites.
The Blue Boar Universal hole cutters have an extra hard grade of tungsten carbide for the tips of the teeth, and a double gauge thick side wall and bottom plate for added strength and durability with even the toughest materials. The added strength of the hole cutter enables the use of ultra deep gullet slots for even easier plug removal.
These TCT hole cutters are the toughest available for maximum performance on the job day after day and hole after hole. They will outperform and outlast dozens of ordinary self-feed bits (and without the mess) or bi-metal hole saws (without the time lost prying out the cut plugs). Use a single hole cutter for every material on the job site.
Aggressive cutting tips and the ability to cut almost every building and construction material makes short work of any project. The rake of the TCT teeth and the drop shaped chip clearance slots allow for easy removal of plugs making for an uninterrupted drilling process
The 2-1/4" cutting depth enables its use for cutting through strapping and joists without ship auger drill bits. Quickly mounts to any standard 2-pin 5/8"-18 arbor with 7/16" shank or with the new Hole Pro XL Arbor for use with Hole Pro dust shields to trap the dust and shavings and control the cutting depth.
Use with any 2-pin style hole saw arbor with 5/8"-18 thread
*** For NAIL FREE materials ***
Visit Store Now !!
Jul 28, 2011 23:58:05
0 comments:
Post a Comment